REGISTER JOBS MENU

Senior Principal Instrumentation Engineer

This job is no longer available.
You can view related vacancies or set-up an email alert notification when similar jobs are added to the website using the buttons below.

BBBH42812
Negotiable
Malaysia
Oil & Gas
Contract
< JOB LISTING

We are seeking for an Experienced Senior Principal Instrumentation Manager to be located in Kuala Lumpur, Malaysia.


Job Description: -


Key Tasks and Responsibilities:


  • Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues. Interpret contractual requirements as they relate to engineering execution

  • Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates. Provide similar support for Variation Orders

  • Interface with all disciplines to develop clash-free designs

  • Interface with other departments to obtain input for Discipline designs and drawings

  • Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management teams, as required

  • Document substantive communications (communications that result in significant decisions or assignment ?
    of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager

  • Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements

  • Raise technical queries to obtain missing information, clarify work scope, and maintain preferred Client's procedures, specifications, standards, practices, and operational requirements.

  • Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.

  • Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.

  • Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope.

  • Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required.

  • Provide technical direction and review of Designers producing products related to Instrumentation and Controls Engineering.

  • Prepare, review, and (as Lead Engineer) approve design reports and procedures.

  • Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables.

  • Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures. Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by the Discipline Lead Engineer.

  • Assist in updating weight reports based on receipt of vendor information.

  • Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.

  • Review and (as Lead Engineer) approve design verification through single-discipline check / inter discipline check (IDC).

  • Provide technical support to fabrication queries, including identifying defect/rectification requirements.

  • Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related.

  • Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity.

  • Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.

  • Present issues and problems to Customers in ? timely manner and assist the Lead Engineer in negotiating resolution by project and company requirement.

  • Perform (as required) Technical Quality Audit reviews by Client's Global Procedures.

  • Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.

  • Capture lessons learned and entered them into Client's Lessons Learned system.

  • Provide leadership, mentoring, and guidance to other engineers.

  • Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.

  • Assign personnel to analysis and design tasks based on knowledge of individual strengths and capabilities.

  • Monitor costs of own work processes.

  • Evaluate costs associated with the product and solutions.

  • Assist in the maintenance of departmental technical guidelines and standard calculation notes.

  • Participate in the development and maintenance of Global Procedures, Software, and Standards.

  • Incorporate approved lesson learn into Client's level 2&3 engineering procedure, as applicable.

  • May participate in standards development committees or task groups such as API.

  • Recognize as having good communication and presentation skills (e.g, published technical papers are clearly written, actively participates in conference and/or is capable presenter of design solutions or topics at lunch and learns, etc.).

  • Assist department manager in identifying departmental needs including development of personnel and technical capabilities.

  • Participate in Client's forums and represents Client's as a subject matter expert (SME).

  • Provide information on employee performance to the Discipline Manager.

  • Assist the Discipline manager in interviewing job applicants.

  • Prepare, review, and (as Lead Engineer) approve automation system definition, including philosophy, specifications, safety drawings, and system architecture.

  • Prepare, review, and (as Lead Engineer) approve ESD logic (as applicable) / cause & effect diagrams and F&G logic (as applicable) / cause & effect diagrams.

  • Review and (as Lead Engineer) approve specifications and data sheets for Instrumentation & Controls equipment.?

  • Review and (as Lead Engineer) approve I&C equipment spare parts lists.

  • Review and (as Lead Engineer) approve inputs to P&ID development and markups based on receipt of vendor information..

  • Review and (as Lead Engineer) approve I&C equipment testing procedures. Attend I&C equipment FATs, as required.

  • Participate in HAZOP, SIL, and Classification Studies, as required.

  • Assist in closing out HAZOP action items.

  • Provide construction, pre-commissioning, and commissioning support, as required.

  • Participate in automation testing, as required.

  • When acting as Lead Engineer, in addition:?

    • Act as project-based Discipline point of contact in communications and meetings with Customer counterparts.?

    • Ensure substantive communications are documented

    • Prepare bids and project Discipline engineering budget and execution plans, updating as required

    • Identify project staff needs based on knowledge of individual engineer's skill sets and provide requests ?
      to the Discipline manager

    • Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets

    • Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan

    • Prepare working forecasts identifying change management plans, corrective action, and real-time schedules?

    • Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity

    • Alert the project team of any deviation from the scope or ? need for a change order

    • Monitor ??I measurement results and take corrective action as necessary to improve Discipline performance, including a performance at interfaces with others

    • Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs

    • Review and approve requisitions, technical quotation evaluations and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required

    • Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews

    • Review comments from Customers & other agencies on documents and drawings produced by the team, ?
      and resolve and give guidance on their update and incorporation

    • Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning

    • Anticipate project engineering needs and plan accordingly

    • Coordinate with vendor for discipline managed/procured items

    • Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members


Essential Qualifications and Education:


  • Bachelor's Degree in Chemical Electrical, or Electronics and Instrumentation Engineering?(Master's Degree is Preferred)

  • 15 years in oil and gas with major contractors or consultants predominantly performing detail design of offshore facilities.

  • Preferably Registered Professional Engineer or member of a professional engineering society and TUV certificate (advantage).

  • Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable

  • Knowledgeable in project coordination and execution skills

  • Recognized across company as a key lead, highly innovative designer or highly skilled analyst.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

< JOB LISTING

This job has now been filled but you may be interested in:

 

Advisor, IT Business Application Management

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVE

  • IT Business Analyst serves as a liaison between IT and business stakeholders, working as IT Business Partner to gather and analyze business requirements, work with solution providers to identify solution, facilitate project prioritization and funding discussions with business for any changes or new requests of IT Digital and Technology initiatives.
  • IT Business Analyst serves as IT Project Manager for the solution delivery once the demand is translated into project, works with project and development team to ensure that the solution deployment is within the scope, timeline and approved budget.

PRINCIPAL ACCOUNTABILITIES
The Business Analyst role delivers bottom line value to the business through implementation of innovative, new IT Digital and Technology solutions and harvesting existing IT assets to enable the achievement of the business strategy, value drivers and KPIs. The role is responsible for all IT solutions that enable the success of business throughout Client Malaysia assets:-

  • Active engagement with business stakeholders to ensure that business strategy and KPIs are met through the delivery of IT Digital and Technology solutions.
  • Helps shape the vision of longer-term business requirements.
  • Communicates business priorities to the technology organization in order to drive effective business solutions.
  • Conducts research to determine if solutions to business requirements currently exist within or outside the business unit, and if not, whether new solutions are feasible.
  • Facilitate funding discussions with business stakeholders and Work Program Budget (WPB) approval process.
  • Facilitate procurement process from sourcing, technical evaluation, contract award to order execution to ensure that project can commence as per plan to meet business goals.
  • Facilitates requirements and design sessions with end user community and communicates these requirements to the development team for the design and implementation of solutions.
  • Analyzes impact of proposed solution across the business.
  • Provides input to the development of formal business cases when enterprise-wide business solutions are proposed.


SSHE ROLES AND RESPONSIBILITIES

  • Take reasonable care of your own health and safety and that of people who may be affected by your acts or omissions.
  • Understand and comply with applicable Client and regulatory HSE requirements.
  • Report hazards, unsafe acts, unsafe conditions, incidents and near hits to your immediate supervisor.
  • Promptly report any violation of law, regulation or other requirement to their immediate supervisor.
  • Accept that safety is a personal responsibility for everyone within the organization.
  • Know, and whenever necessary, implement Stop Work Authority. *
  • Participate in health, safety and environment activities and initiatives.

QUALIFICATIONS AND EXPERIENCE

  • Bachelor's degree in computer science, computer technology, or related fields.
  • At least five years' experience in business analyst or IT project management role.
  • Worked as business analyst or project manager in full SDLC lifecycle for Engineering & Maintenance related software maintenance/development/implementation projects.
  • Experience in Engineering & Maintenance Applications such as GE Asset Performance Management (APM), SAP Plant Maintenance and S/4HANA will be advantageous.
  • Agile project experience.
  • Demonstrated learning agility in ambiguous and unfamiliar situations.
  • Strong communication and presentation skills.
  • Strong stakeholder management skills - including experience coaching stakeholders.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Geophysicist

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVES
As a member of a multi-discipline exploration team, complete regional studies and petroleum system assessments, which can be used to high grade leads and prospects in COMPANY Malaysia shelf PSC's and evaluate open blocks in Malaysia. Mentor and develop junior Malaysian staff.

PRINCIPAL ACCOUNTABILITIES

  • Carry out 3D and 2D seismic interpretation, including stratigraphic and trace attribute interpretation and mapping, including depth conversion to generate prospects and leads.
  • Apply quantitative interpretation (QI) techniques such as seismic reservoir characterization and AVO analysis to optimize exploration, appraisal and development of hydrocarbon pools.
  • Identify leads and mature suitable prospects to a ready-to-drill category. Provide technical input into well proposal and post-drill analysis. Liaise with drilling and reservoir engineers to optimally plan well trajectories/well design for exploration and appraisal drilling.
  • Integrate existing and new well and seismic interpretations into regional and prospect assessments and databases. Provide technical support to G&G Team in developing regional play, prospect risking and ranking.
  • Provide input to reservoir delineation, resource assessment, geological modeling and field development planning.
  • Plan and support seismic data acquisition and processing.
  • Liaise with partners, regulatory bodies, and contractors.
  • Mentor and develop junior Malaysian technical staff.

KEY AUTHORITIES
As provided/assigned by Senior Manager, Exploration.

WORKING RELATIONSHIP

  • Works closely with other members of the team to assure the detail at which the
  • models are built is appropriate for resource assessment, reservoir simulation and well planning.
  • Liaise and work with all disciplines of the Petroleum Exploration and Development Team, Production and Drilling departments.

QUALIFICATIONS AND EXPERIENCE

  • Relevant degree with a preference for postgraduate qualifications.
  • Multi-basin experience in exploration / appraisal / field development geophysics interpretation and reservoir characterisation.
  • Comprehensive knowledge of seismic attribute analysis and rock physics. Able to apply Quantitative Interpretation (QI) techniques and incorporate them into the modeling process.
  • Experience in incorporating multiple data types and data sets to generate an integrated and comprehensive interpretation, particularly in areas with poor to limited data.
  • Skilled in seismic data calibration, seismic reservoir characterization and hydrocarbon detection from seismic.
  • Demonstrable skills in 3D and 2D seismic interpretation and mapping using Landmark applications.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Senior Geologist

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVES

  • Build and evaluate a range of 3D static geological models in support of reservoir characterization and dynamic reservoir simulation studies, leading to an understanding of the reserves distribution and an optimum field development strategy for the development projects.
  • Principal role to build discrete static models utilizing multiple subsurface scenarios capturing structural, stratigraphic and petrophysical uncertainties, for reserves assessment, history matching, production optimization and development strategy. This requires experience in geomodelling using seismic data to help constrain geological model facies and knowledge of analogue data to constrain property distributions within the modeled facies.
  • Review near field exploration and appraisal opportunities which may prove to be economic as part of a larger development.
  • Prepare detailed reports on model construction and support the reporting of hydrocarbons-in-place calculations as well as update and prepare field development plans.
  • Assist team review of potential appraisal and development well locations and trajectories, and preparing well proposals

PRINCIPAL ACCOUNTABILITIES

  • Establish reservoir characterization of the Malaysia oil and gas fields that incorporates sufficient facies analysis, sedimentology, sequence stratigraphy and dynamic data (reservoir pressure, well deliverability) that meet both project objectives and milestones.
  • Provide technically accurate and geologically sound reservoir descriptions for Oil and Gas Fields that incorporate sufficient detail to meet COMPANY and JV Partners' requirements
  • Independently perform geological modelling (several projects and in complex geological and structural setting) by using the industry software (preferred Petrel), starting from designing what to be modelled, input data checking and preparation for structural framework, 3D grid design, well data analysis and re-scaling, facies and petrophysical modelling, volumetric analysis etc.
  • Calibrate static models with dynamic production data where possible (in association with reservoir engineers and G&G specialists).
  • Conduct resource assessments to SPE/PETRONAS guidelines for all oil and gas fields and provide technical inputs into ARPR submissions.
  • Study the subsurface uncertainties by building multiple scenarios (as well as stochastic realizations) to quantify volumetric
  • Perform geological risk analysis in sufficient subsurface data, and provide suggestion and advise as per the outcome of the analysis
  • Provide geological input to drilling programs for appraisal and development wells (geological cross sections, maps, correlations and facies models).
  • Optimize appraisal/development well locations in conjunction with the geophysicist(s) and reservoir engineer(s) using Petrel as the common work platform.
  • Prepare and present technical data to partners during all stages of project evaluation, well proposals, Field Development Plan's and project implementations, to achieve endorsements and approvals for proposed work activities.
  • Work closely with drilling engineers, operations geologists, petrophysicists and reservoir engineers on all aspects of well planning and implementation.

KEY AUTHORITIES
As provided/assigned by General Manager, Petroleum Development, Manager and/or Equity Team Leader.

WORKING RELATIONSHIP

  • Works closely with other members of the team to assure the detail at which the models are built is appropriate for resource assessment, reservoir simulation and well planning.
  • Liaise and work with all disciplines of the Petroleum Exploration and Development Team, Production and Drilling departments.

QUALIFICATIONS AND EXPERIENCE

  • Degree / Masters in Geology or Earth Sciences.
  • Proficient in the use and application of industry standard computer mapping techniques and 3D geological modeling software (preferably Petrel software).
  • Minimum of 10 years of working experience in an exploration and production or service-related company on field developments is essential.
  • Familiarity with reservoir parameter analysis (porosity, permeability etc).
  • Proven experience building fault and 3D geo-cellular models using the Petrel software essential, including geological correlations, facies analysis and well planning.
  • Proven experience in "QC"ing models so that they integrate sufficient geological and dynamic data to meet project objectives.
  • Previous exposure to a broad range of geoscience skills essential. (i.e. reservoir geological modelling (2D & 3D), reservoir property mapping, net pay calculations, well planning, sedimentology, sequence stratigraphy and petrophysics).
  • Proven experience in the use of an industry standard mapping software (e.g. Petrel, PetroSys, CPS3, ZMAP, etc.) is an advantage.
  • Work effectively within the team.
  • Self-motivated with a proven record of achieving targets.
  • Proven communication and presentation skills.
  • Fluent in English-written and spoken.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Analyst, Asset Planner

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVES

  • Lead delivery of critical Business Analysis activities for the assigned Asset.
  • Lead the coordination and delivery of asset budgets, and long-term asset plans.
  • Lead high-value analysis and reports on operational performance vs budgets and work plans.
  • Build impactful presentations which allow effective communication of asset performance to internal and external audiences.
  • Build and maintain high-quality records and sources of asset performance data.
  • Maintain close and effective working relationships with all functional groups supporting the business planning and economics function.

PRINCIPAL ACCOUNTABILITIES

  • Lead coordination of all budget and business planning requirements for the assigned Asset with focal personnel from other functional groups. This includes responsibility for building and delivering all components of the WP&amp;B and Home Office budgets accurately, and according to the required timeline.
  • Lead coordination of preparation of monthly Finance &amp; Operations (F&amp;O) review report with Finance and the functional management teams.
  • Lead preparation of management summaries, reports and presentations for local management teams, executive management and external audiences.
  • Lead analysis of operational data across all business parameters to summarize totals, explain variances, and to highlight opportunities for improvement, and to enhance value-driven decision-making.
  • Manage data related to capital and operating expenditures for the assigned Asset to enable accurate and timely reporting.
  • Lead coordination of open communication between all functional groups and other business analysts to ensure consistent communication of data, and effective planning.
  • Lead data preparation, analysis, and communication.
  • Lead improvements in processes and workflows which increase the contribution to the overall maximization of value from the asset.

KEY AUTHORITIES

  • As assigned by Head of Business Planning and Economics.

WORKING RELATIONSHIPS

  • Given the nature of the role, the senior analyst will be accountable for timely delivery of products that depend largely on resources outside his/her direct control. For that end, the following are critical interfaces, across which responsibilities and process expectations (schedule and deliverables) have to be appropriately aligned:
    • Focal-points for provision of performance data and descriptions of key activities affecting either historical actuals or predicted forecasts.
    • Focal points for coordination on all WP&amp;B, budget and outlook forecasts, and for retrieving, reporting and analyzing required financial information (income statements, pro-forma income, cost accounting, etc.).
    • Focal points for two-way transfer of information including instructions from the corporate office.

QUALIFICATIONS AND EXPERIENCE

  • 15-years' experience in the upstream petroleum industry, focused on Business Analysis in an operational or project development environment.
  • Strong understanding of oil and gas exploration, development and production activities.
  • Strong familiarity with management accounting for business-performance measurement, setting and tracking of financial and operating targets, identifying key value drivers, and with analysis methods and tools to support business decisionmaking.
  • Strong awareness of Production Sharing Contracts, Joint Operating Agreements and Sales Agreements.
  • Knowledge of business drivers, including NPV, ROI and ROCE.
  • Ability to work in a highly organized manner, and with precision and attention-todetail.
  • Well-developed analytical skills, with the ability to distill key insights from multiple sources of data.
  • Efficient work style, with the ability to complete tasks quickly.
  • Strong teamwork, communications, and leadership skills.
  • University degree (or similar qualification) in Business Administration, Finance, Accounting or Engineering subjects.
  • Fluent in oral &amp; written English.
  • Strong experience and knowledge of Microsoft Office, and appreciation of planning and economics software.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Civil Engineer

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

Job description
Civil and structural engineering work in office in Kuala Lumpur for onshore plant (brownfield and greenfield) in different phases (feasibility study, conceptual, FEED and detailed design):-

  • Managing or carrying out the work to meet technical and commercial requirements
  • Analysis and design and preparation of basis of design, specifications and reports
  • Checking of drawings
  • Liaison with same and other disciplines, client, contractors and third parties
  • Meetings
  • Occasional site visits

Requirements

  • Degree in civil and structural engineering
  • Professional membership for senior positions is advantageous.
  • Min experience 5 years in similar industry
  • Experience in buildings, structural and infrastructure (earthworks, roads, drainage and sewerage) design
  • Experience in foundation design (for buildings, structures, equipment and tanks)
  • Familiarity with ground investigation and geotechnical requirements
  • Familiarity with architectural work for plant buildings
  • Knowledge of plant requirements
  • Conversant with Eurocodes
  • Ability to use STAAD.Pro and other related commercial software
  • Good understanding of concepts and ability to apply them in routine and unfamiliar design cases
  • Ability to express and communicate clearly, orally and in writing
  • Appreciation of impact of decisions on other disciplines, engineering company, client and community
  • Agility and teamwork spirit

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Senior Civil engineer

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

Job description
Civil and structural engineering work in office in Kuala Lumpur for onshore plant (brownfield and greenfield) in different phases (feasibility study, conceptual, FEED and detailed design):-

  • Managing or carrying out the work to meet technical and commercial requirements
  • Analysis and design and preparation of basis of design, specifications and reports
  • Checking of drawings
  • Liaison with same and other disciplines, client, contractors and third parties
  • Meetings
  • Occasional site visits

Requirements

  • Degree in civil and structural engineering
  • Professional membership for senior positions is advantageous.
  • Min experience 10 years in similar industry
  • Experience in buildings, structural and infrastructure (earthworks, roads, drainage and sewerage) design
  • Experience in foundation design (for buildings, structures, equipment and tanks)
  • Familiarity with ground investigation and geotechnical requirements
  • Familiarity with architectural work for plant buildings
  • Knowledge of plant requirements
  • Conversant with Eurocodes
  • Ability to use STAAD.Pro and other related commercial software
  • Good understanding of concepts and ability to apply them in routine and unfamiliar design cases
  • Ability to express and communicate clearly, orally and in writing
  • Appreciation of impact of decisions on other disciplines, engineering company, client and community
  • Agility and teamwork spirit



About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Designer, Piping

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

Job Summary
To aid in the production of engineering drafting deliverables for transfer of a project's technical information from design to construction and operation.

Qualification / Skills

  • Diploma/Certificate in relevant Drafting Discipline from a recognised institution.
  • Min. 7 years of overall experience with 5 years in onshore/offshore Oil and Gas industry.
  • Good knowledge of AutoCAD Computer Software.
  • Having a thorough working knowledge of codes and practices applicable to piping design
  • Organizational skills and time management.
  • Able to work in a team environment.
  • Conversant with company client drafting standards and specification.
  • Conversant with company quality control assurance requirements applicable to drafting function.
  • Able to create base design drawings from agreed work scope with minimal input from engineering personnel.
  • Ability to accept delegated responsibility and control budgets for delegated tasks.
  • Computer literate (database / spreadsheets).
  • Able to provide drafting checking function as directed by Lead Designer.
  • Capable of directing activities and motivating junior members of design team.
  • Able to communicate clearly with engineering personnel.
  • Able to contribute to group / discipline objectives applicable to drafting function.
  • Able to identify improvement opportunities and techniques relevant to drafting personnel.

Responsibilities

  • Good knowledge of AutoCAD Computer Software.
  • To prepare drawings and design deliverables to the required technical quality with guidance from engineering personnel.
  • Responsible for preparation of detailed design drawings and documents to the requirements of the Lead Designer.
  • To ensure all drawings and documents are complete within the allocated hours as directed by the Lead Designer.
  • To ensure drawings are developed per mechanical design i.e. pipe material class specifications
  • Fully aware and compliance to pipe material classes and have thorough knowledge of pipe class within PDMS catalogue.
  • To ensure discipline deliverables conform to the best-practice.
  • To review access and handling requirement for equipment, valves, and instrument items
  • To maintain good relations with other disciplines and with the client at all time.
  • To have an understanding of the Department checking and approval procedures.
  • To maintain project discipline filing system as defined in Company procedures.
  • To ensure that the piping design work are in compliance with the relevant project standards and specifications.
  • Ability to do cadding work and manual drafting are advantage.
  • Provide accurate piping MTO.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Technical Assistant

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVES

  • Assist Geologist and Geophysicist to maintain standard technical drawing, guided and monitor by senior staff.

PRINCIPAL ACCOUNTABILITIES

  • Draft and complete various scale of drawing using computer software.
  • Preparing and plotting topography maps, seismic and well log.
  • Produce, re-produce and update schematic diagrams within timeframe.
  • Generate graphic animations slides for management presentations.
  • Assist with preparation of various internal and outgoing reports.
  • Maintain Technical Skills and Knowledge.

WORKING RELATIONSHIP

  • Coordinate internally with Exploration team members, especially Ops Geologist, Project Geologist & Seismic Acquisition / Processing Coordinator, Data Management Group and externally with JV Partners.

QUALIFICATIONS AND EXPERIENCE

  • Diploma in computer studies or equivalent.
  • Minimum 5 years experience in oil and gas or it relevant.
  • Experience and knowledge with basic computer graphic software which include Microsoft Office, CorelDraw or any of relevant software.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Staff/Senior Petrophysicist

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVES

  • Appraisal and development assessment of appropriate areas and fields.
  • Operational (drilling and well intervention) planning and execution for appraisal and development wells.

PRINCIPAL ACCOUNTABILITIES

  • Provide direct support to company's appraisal and development efforts.
  • Plan and manage cost-effective logging and coring programs.
  • Carry out near real-time formation evaluation in support of drilling and well intervention operations.
  • Plan, undertake and manage petrophysical studies for reservoir characterization and volumetric resource assessment.

KEY AUTHORITIES

  • As provided/assigned by General Manager, Petroleum Development.

WORKING RELATIONSHIP

  • Reporting to Team Leader, Petroleum Development Sarawak Oil.
  • Liaise with immediate team members and extended team members in drilling, development and production.

QUALIFICATIONS AND EXPERIENCE

  • Degree in the relevant field with minimum 10 years' experience.
  • Good knowledge of MWD/LWD, wireline logging tools and formation evaluation techniques.
  • Good IT and data management skills.
  • Familiar in evaluating vintage logs.
  • Good skills in interfacing between G & G, reservoir engineering and drilling.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Senior Piping Material Engineer

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

Job Responsibilities:

  • Possess Bachelor's Degree, Post Graduate Diploma of Professional Degree in Material Science, Mechanical Engineering or equivalent.
  • Minimum 8 years of working experience in the related field.
  • Good knowledge in International codes such as ASME 31.3, API, ASTM, BS, etc. Familiar with the basis of calculations stated in ASME B31.3, such as branch calculations and wall thickness calculations.
  • Familiar of preparation of piping material class, valve and piping specialty data sheets.
  • Good material database skill and experience to work in integrated material control systems (Eg. SPMat, etc) with PDS/PDMS/S3D/SP3D/E3D 3D CAD is preferable.
  • Able to work in team and possess excellent interpersonal, communication and writing skills.
  • PC literate (MS Word & Excel as a minimum).
  • Good command in English (spoken and written).
  • Priority given to Malaysian Nationality.

Job Descriptions:

  • Review ITB package, Process licenser's requirements, Client's Requirements and FEED Documentations.
  • Select applicable standard, codes and specification and incorporate them in the job specification.
  • Prepare summary of piping classes.
  • Establish Piping Material Specification and piping standard assemblies.
  • Provide data for piping components to 3D CAD Coordinator or 3D Administrator.
  • Prepare valve and specialty part data sheets.
  • Prepare Requisitions for Inquiry (RFI) and Requisition for Quotation (RFQ) for all piping materials.
  • Prepare Technical Bid Evaluation based on vendor quotation.
  • Review and comment (when required) vendor data documents and drawings.
  • Supervises all Material Take-Off (MTO) activities and matters related to piping material within piping department.
  • Provide guidance and training to junior engineer.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Specialist, Procurement and Contracts

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

KEY OBJECTIVES

  • To execute all contracts and procurement related activities to ensure continuous and uninterrupted operations while complying with COMPANY's Regulation, SSHE guidelines and PETRONAS' Procurement Standard.


PRINCIPAL ACCOUNTABILITIES

  • To execute requirements by end-user in the most effective way.
  • To ensure that all activities carried out are in line with COMPANY'S Regulation and PETRONAS' Procurement Standard.
  • To continuously improve the internal procurement process where possible and highlight potential risk and exposure to the COMPANY.
  • To educate other sections of the COMPANY with regards to best practices and achieving full cost recovery.
  • To participate in procurement related initiatives by PETRONAS and submit required reports by Group Procurement.


QUALIFICATIONS AND EXPERIENCE

  • Bachelor's degree
  • Professional certificate by accredited Bodies/ Associations is an advantage but not necessary.
  • Minimum of 5 years' experience in Oil & Gas
  • Minimum of 3 years relevant working experience with an E&P operator or contractor in Malaysia.
  • Excellent communication and presentation skills
  • Demonstrate high level of interpersonal skills and integrity
  • Ability to work independently with minimal supervision
  • Proficiency in SAP is an advantage but not necessary

Additional Desirable Qualifications:

  • Exposure to the latest PETRONAS Procurement Standard revision and implementation of the manual with hands-on experience of all forms of procurement process in the last 3 years
  • Direct involvement with Group Procurement PETRONAS

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.

Senior Analyst, Business Strategy - Procurement

SAVE
Negotiable
Malaysia /
Oil & Gas /
Contract /

PRINCIPAL ACCOUNTABILITIES

  • As Senior Analyst Business Strategy in Procurement team, accountable for coordination, and execution of purchasing plan and strategies in an effective manner.
  • Ensure timely placement of contracts/purchase orders as per assignment from Procurement Team Lead.
  • Ensure standards of ethics, fairness in procurement activities is maintained, seek to uphold and enhance the integrity of the procurement process as well as maintain strict confidentiality of documents pertaining to procurement as per Company's Procurement Procedure and PETRONAS's Standard.


PROCUREMENT RESPONSIBILITIES

  • Plan, coordinate, and administer procurement activities to meet specified required dates.
  • Initiate, perform and manage all efforts on procurement process and activities to put in place purchases and contracts as per assignment.
  • Develop, establish, and implement procurement procedures, standards and systems required in administering the procurement efforts.
  • Initiate activities related to sourcing, pre-qualification, enquiry, evaluation, recommendation, ordering in an efficient and cost-effective manner.
  • Prepare Pre-Qualification/Screening, Tender Plans, Invitation tTo Bid Documents.
  • Evaluation Criteria, Evaluation Reports and Award Recommendations.
  • Liaise with PETRONAS/approving authorities and partners to obtain the necessary comments, endorsements and approvals of the procurement related activities.
  • Seek PETRONAS/partners endorsement and approval of Tender Plans, Technical/Commercial Evaluation Criteria, Technical Evaluation Reports, Techno, Commercial Evaluation Reports and Award Recommendation Reports.
  • Initiate and prepare PETRONAS reporting for PETRONAS Contract Monitoring (PCM), and any other reports as required by PETRONAS or Company.
  • Advise the company on PETRONAS/government procedures, rules and regulations in a Malaysian operating environment on procurement related activities.
  • Act as focal point on all procurement matters and interfacing with User Departments, including self-starting, control and coordinating all related activities.
  • Prepare and Facilitate Procurement Road Show to Contract Holder/Users to educate the procurement process and procedure.
  • Any other activities to support procurement function as per assignment.


QUALIFICATIONS AND EXPERIENCE

  • Bachelor's degree in business administration or equivalent.
  • Minimum five (5) years relevant experience in oil and gas industry.
  • A sound knowledge of PETRONAS Tenders and Contracts Procedures.
  • Self motivated.
  • Strong computer literacy.
  • Strong team building skills.
  • Fluent in English both written and spoken


KEY AUTHORITIES

  • Preparing, and coordinating detailed purchasing work plan of assigned Contracts/purchase orders.
  • Ensuring that all activities comply with all Company, PETRONAS, and Government requirements, procedures and regulations.

About Petroplan

Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals in the Energy sector. Since 1976, Petroplan has been here to help people like you make the most of the opportunities available and find the best fit for you as an individual.

Over 10,000 placements in more than 55 countries for over 550 clients across 65 disciplines.

In an industry where skilled and experienced professionals are increasingly sought after resource, we appreciate the true value of what you have to offer. What's more, we understand that different things are important to different people in today's world of work - it's about making exactly the right connections for you as an individual.

Our reputation for contractor and candidate care, understanding what makes you tick, and finding you the best match is second-to-none. We understand the industry inside-out and seek to understand YOU and your motivations in the same way. We take the time to evaluate your individual strengths, understand the most important things to you, and establish exactly what you're looking for from your next role.